虾料制粒机的压辊数量对颗粒品质的影响

压辊数量对虾料制粒机的颗粒品质有很大影响。文章分别对两压辊、三压辊结构进行分析,研究表明,两压辊制粒机较三压辊制粒机,更适宜用于虾料制粒。     

Sublethal effects of nine insecticides on Drosophila suzukii and its major pupal parasitoid Trichopria drosophilae

Background

Although the pupal parasitoid Trichopria drosophilae is used in conservative and augmentative biocontrol of Drosophila suzukii infestations, current pest management strategies mostly rely on multiple insecticide applications. In this context, the aim of the study was to investigate the baseline toxicity of nine insecticides on D. suzukii larvae and their multiple sublethal effects (LC₁₀) on immature stages of the pest feeding on contaminated diet and T. drosophilae developing within the intoxicated host.

Results

Chlorpyriphos and azadirachtin showed the lowest and the highest LC₁₀, the values of which were 9.78 × 10¹³ and 1.46 × 10³ times lower than their recommended label field rate, respectively. Among tested insecticides, imidacloprid, malathion and dimethoate were the only treatments that did not affect the juvenile development time of D. suzukii, while spinosad and the organophosphates chlorpyriphos and dimethoate did not influence fly pupal size. No sublethal effects were recorded on T. drosophilae degree of infestation (DI) and juvenile development time. On the contrary, cyazypyr and dimethoate negatively affected the success of parasitism (SP) and the number of progeny of the pupal parasitoid, in association with malathion for the first parameter and spinosad for the fertility. Compared to the untreated control, more female progeny emerged following azadirachtin exposure, while dimethoate caused the opposite effect. Imidacloprid, lambda-cyhalothrin and spinetoram decreased hind tibia length of emerged parasitoids.

Conclusion

This study provides new insights on the (eco)toxicological profile of nine insecticides and new information needed to support the deployment of T. drosophilae in the field within the sustainable management techniques against D. suzukii. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

6种公路常绿植物叶面特性对滞尘效果的影响研究

通过选择6种具有代表性的道路常绿植物,应用接触角测定仪测定了不同树种叶片的接触角,通过扫描电镜观察比较了6种常绿植物的叶表面形态结构,分析其对滞尘能力的影响。试验结果表明常绿植物叶片正面接触角越大,滞尘能力越小;表面叶孔越多,粗糙度越大,滞尘能力越强。研究成果可为城市绿化树种的选择提供基础依据。     

冀北山地杨桦次生林林分空间结构研究

在木兰林管局桃山林场选取面积为100 m×100 m的杨桦次生林样地,以每株林木树高、胸径和坐标为基础数据,运用混交度、大小比数和角尺度等林分空间结构参数分析了杨桦次生林的空间结构特征。结果表明:(1)该林分中山杨Populus davidiana和白桦Betula platyphylla在株数和断面积比例上占优势,为林分内优势树种;(2)林分各混交类型的比例相差不大,林分整体呈中度混交状态;(3)林分优势木和亚优势木相对较多,基于胸径、树高得到的平均大小比数结果基本一致,均能客观反映林分的分化规律;(4)林分平均角尺度为0.504,属于随机分布,林下伴生树种以集聚分布为主,但优势树种的随机分布趋势起决定作用。     

苜蓿秸秆压缩仿真离散元模型参数标定

为了提高苜蓿秸秆压缩过程中离散元仿真研究所用参数的准确度,该研究采用物理试验和仿真优化设计相结合的方法对离散元仿真参数进行标定。首先,以接触参数物理试验结果为仿真参数选择依据,利用Plackett-Burman试验对初始参数进行显著性筛选,方差分析结果表明,苜蓿秸秆-苜蓿秸秆静摩擦系数、苜蓿秸秆-苜蓿秸秆滚动摩擦系数、苜蓿秸秆-45钢静摩擦系数对仿真休止角影响显著。进一步以休止角的相对误差值为评价指标,对3个显著性参数进行最陡爬坡试验,优化显著性参数取值范围,并基于Box-Behnken试验建立休止角与显著性参数的二阶回归模型,以物理试验得到的38.88°休止角为目标值,对显著性参数进行寻优,得到最优组合:苜蓿秸秆-苜蓿秸秆静摩擦系数为0.45、苜蓿秸秆-苜蓿秸秆滚动摩擦系数为0.08、苜蓿秸秆-45钢的静摩擦系数为0.54。最后利用T检验得到P0.05,表明仿真休止角与物理试验值无显著性差异,验证了最优参数组合的可靠性。研究结果表明,应用上述各优化试验来标定离散元仿真参数是可行的,同时标定的参数可为苜蓿秸秆的其它仿真试验提供参考。     

基于土壤微波辐射布儒斯特角反演土壤含水率

在利用被动微波遥感技术进行裸露地表土壤含水率(Soil Moisture Content,SMC)的反演中,土壤粗糙度是制约反演精度的最关键因素。该研究利用改进的积分方程模型(Advanced Integral Equation Model,AIEM)进行地表多角度微波发射率的模拟,探索地表微波辐射多角度信息用于提高地表SMC反演精度的可行性。基于不同SMC和不同粗糙度地表多角度V极化发射率数据的变化趋势提取土壤介质布儒斯特角,结果表明,土壤布儒斯特角对SMC具有较高的敏感性,C波段(6.6 GHz)不同含水率土壤的布儒斯特角分布在60°～80°范围内。基于AIEM模拟数据的分析发现,土壤布儒斯特角正切值与SMC具有较好的线性关系,线性拟合决定系数为0.94,均方根误差为0.027cm~3/cm~3,并得到了基于布儒斯特角的裸露地表SMC反演算法。基于模拟数据的算法验证结果表明,算法的SMC预测值与理论值的决定系数为0.95,均方根误差为0.024 cm~3/cm~3。算法在不同土壤粗糙度自相关函数下均表现出稳健的特性,SMC预测精度最大均方根误差为0.027 cm~3/cm~3,最小为0.023cm~3/cm~3。基于布儒斯特角的SMC反演算法利用的是多角度土壤发射率的相对变化而非其绝对数值,该研究为SMC的多角度被动微波遥感提供了一种不同的研究思路。     

静动荷载作用下小麦剪切特性试验研究

为研究静动载荷作用下的粮食剪切特性,利用开发的新型粮食动直剪仪,设计了孔隙率为39%、36%、33%以及竖向压力为50、100、150、200k Pa下的小麦单调直剪、往复剪切及往复后单调直剪试验,研究了小麦静动力剪切特性,并对比分析了小麦单调直剪与往复后单调直剪的强度、变形结果。研究结果表明:单调直剪试验中,同一孔隙率下,竖向压力越大,其软化现象越明显,剪胀现象越不明显,剪胀角越小,竖向压力为50、100、150、200k Pa下对应的剪胀角分别为4.5°、3.6°、2.4°、0.7°;同一竖向压力下,随着小麦孔隙率减小,其软化现象越明显,内摩擦角也越大,孔隙率为39%、36%、33%的小麦对应的内摩擦角分别为22.2°、24.4°、28.1°。剪胀角也随着小麦孔隙率减小而增大,对应的剪胀角分别为1.3°、3.6°、9.9°;往复剪切试验中,孔隙率越小,小麦往复剪切软化现象越明显,剪缩现象越不明显,最大剪缩量越小,孔隙率为39%、36%、33%的小麦对应的最大剪缩量分别为2.77、1.74、1.15 mm。往复后单调直剪与单调直剪试验结果对比表明,往复后单调直剪的小麦抗剪强度明显增大,其剪胀现象更明显,最大剪胀量也增大。试验结果可为粮仓结构安全性设计,尤其是粮仓结构动力分析提供依据。     

基于EDEM的猪粪接触参数标定

为准确快速获得畜禽粪便的接触参数,该研究通过物理堆积试验与仿真方法对猪粪接触参数进行了标定。测定了不同含水率下猪粪的堆积角,建立了含水率与堆积角的回归方程;基于Hertz-Mindlin with JKR球体粘结模型,进行了离散元仿真模拟;采用筛选试验设计(Plackett-BurmanDesign,P-BD)对10个初始参数进行了筛选,发现JKR(Johnso-Kendall-Roberts)表面能、颗粒间滚动摩擦系数、颗粒间碰撞恢复系数对猪粪堆积角影响显著;并根据响应曲面试验设计(Box-BehnkenDesign,B-BD)建立了堆积角与显著性参数的二阶回归模型,得到了3个显著性参数值分别为JKR表面能0.03J/m~2、颗粒间滚动摩擦系数0.27、颗粒间碰撞恢复系数0.54;将仿真所得堆积角与物理试验值进行对比验证,相对误差为4.27%。结果表明,该研究提出的标定方法能准确模拟物理堆积试验,可为畜禽粪便接触参数的标定提供参考。     

Evaluation of Dynamic Structural Disorders in the Upper Airways and Applied Rein Tension in Healthy Dressage Horses During Riding in Different Gaits and Head–Neck Positions

Flexion of the horse’s head and neck during dressage riding reduces the pharyngeal lumen with the risk of increased upper airway resistance and upper airway obstructions. According to the Fédération Equestre Internationale, hyperflexion is achieved through force, whereas the position low–deep–round is nonforced. The objectives of this study were to evaluate (1) applied rein tension and (2) dynamic structural disorders in the upper airways in dressage horses in different gaits and different head–neck positions (HNPs). Overground endoscopy (OGE) and rein tension were evaluated in 13 clinically healthy and high-performance Warmblood dressage horses while being ridden in a standardized program comprised of four different gaits (halt, walk, trot, and canter) and in four HNPs (unrestrained, competition frame, hyperflexion, and low–deep–round). All included horses were able to achieve the desired HNPs. The HNP low–deep–round showed significantly lower rein tension than competition frame (P < .001) and hyperflexion (P < .001). An association was found between dynamic structural disorders in the upper airway tract evaluated by OGE and head–neck flexion, but this association was not linked to the degree of flexion. The HNP hyperflexion was neither associated with greater rein tension nor severe dynamic structural disorders than the HNP competition frame. This study confirms that low–deep–round is a nonforced position, in contrast to hyperflexion. Further studies are needed to evaluate whether dynamic structural disorders are a result of flexion or if the degree of flexion has an impact.     

基于改进型倾角测量的弧垂监测系统

为了提高动态增容的安全性,有必要对输电线路弧垂进行实时监测,为此需构建导线的弧垂监测系统。通过建立导线倾角—弧垂的数学模型,分析弧垂计算过程中误差产生的原因,提出改进措施,并通过实验验证了改进措施对提高弧垂计算精度的有效性。同时设计了基于Zigbee技术与GPRS相结合的无线传输网络,具有扩展性强,功耗低的特点。构建了无线传感网络供电模块,使整个弧垂监测系统能够准确、可靠、实时地工作。